Diamondback® Sheets
Diamondback® polyurethane liners and sheets are among the most versatile of all lining materials. A trademarked product manufactured only by Bailey-Parks, these polyurethane liners are available in a variety of standard sizes and hardnesses, providing outstanding resistance to impingement and frictional abrasion. Diamondback® urethane sheets meet FDA standards for dry food handling and cushion grain, feed and other materials from breakage.
Each and every Diamondback® polyurethane sheet is produced using computerized casting and monitoring equipment. In addition to standard verification processes, Bailey-Parks checks every lot both during the pour and after the final cure to ensure ultimate tensile strength, percent elongation break at 100 and 300 percent modulus and durometer rating.
Diamondback® Liner Varieties
Non-Reinforced Industrial Liners
Non-reinforced urethane sheets have no backing. They are the most lightweight and flexible of all Diamondback® polyurethane sheet types and can be hand-formed.
Non-reinforced sheets are available in 1-foot increments between between 1 x 1 foot and 10 x 50 feet. Thickness can range from 1/8 to 1 inch.
Cotton Fabric–Backed Industrial Liners
Cotton Fabric–Backed Diamondback® is lightweight, flexible and can be glued to other substrates with commercial adhesives.
Urethane sheets are available in the following sizes:
| 2 x 4 feet | 4 x 4 feet |
| 4 x 8 feet | 4 x 10 feet |
| 4 x 25 feet | 4 x 50 feet |
Expanded Metal Backed Industrial Liners
Expanded Metal-Backed urethane sheets are backed with 16-gauge steel that makes them more rigid and flat. The metal backing also provides a structurally sound "stopping point" for bolt heads.
Expanded Metal-Backed Diamondback® sheets are available in 1-foot increments between 1 x 1 foot and 4 x 10 feet. Thickness can range from 1/8 to 1 inch.
Perfoback™ Industrial Liners
Perfoback™ urethane sheets are backed with perforated metal. The small openings accommodate self-tapping metal screws.
Available as 4 x 10-foot polyurethane liner sheet.
Diamondback® Fastening Solutions
Wedgie Bolt
Weldable Diamondback®
Metal plates welded to the back of these urethane sheets allow them to be welded onto metal surfaces.
Perfo™ Screw
For use with Perfoback™ urethane.
Molded-in Bolts
Bolts can be molded into your material per your custom specifications.
Speciality Adhesives
Used for gluing Non-Reinforced and Cotton Fabric–Backed Diamondback®.
Click here to see the brochure.
Contact Bailey-Parks today to discuss our Diamondback® polyurethane sheet products. Our knowledgeable sales team can help you find the right urethane solution to fit your needs.
