Bailey-Parks fabricates long-lasting urethane snow plow blades for "Snow Hog" snow plows, available in any width, length, or hole pattern (with or without slots) that adapt to standard hardware. The square edged plow blades should be used with shoes or casters and be positioned to allow no more than two inches of overhang. When a blade is not beveled, Bailey-Parks recommends raising the casters and back-dragging the blade approximately 50 yards to reduce start-up chatter. Additionally, plowing speeds in excess of 30 MPH are not advised.

Urethane snow plow blades provide the appropriate amount of give to reduce damage to runway lights, cobble stones, decorative bricks, and other roadway objects commonly associated with concrete and asphalt surfaces. Their durable design helps reduce vibration and features slotted holes that allow the blades to be inverted for twice the service life.
 
 

Available stock sizes (square edge design):

1" x 6" x 10', 11', 12' & 50'
1 1/2" x 8" x 10', 11', 12' & 50'
1 1/2" x 10" x 10', 11', 12' & 50'

Beveled edge designs are available for special order. Contact Bailey-Parks to learn more or place your urethane snow plow blade order. Down load product prochure