Diamondback®
Diamondback® polyurethane sheets and liners are among the most versatile of all lining materials. A trademarked product manufactured only by Bailey-Parks, these polyurethane sheets are available in a variety of standard sizes and hardnesses, providing outstanding resistance to impingement and frictional abrasion. Diamondback® sheets meet FDA standards for dry food handling and cushion grain, feed and other materials from breakage.
Each and every Diamondback® polyurethane sheet is produced using computerized casting and monitoring equipment. In addition to standard verification processes, Bailey-Parks checks every lot both during the pour and after the final cure to ensure ultimate tensile strength, percent elongation break at 100 and 300 percent modulus and durometer rating.
Diamondback® Varieties
| Non-Reinforced |
Non-reinforced sheets have no backing. They are the most lightweight and flexible of all Diamondback® sheet types and can be hand-formed.
Non-reinforced sheets are available in 1-foot increments between between 1 x 1 foot and 10 x 50 feet. Thickness can range from 1/8 to 1 inch.
Cotton Fabric–Backed
Cotton Fabric–Backed Diamondback® is lightweight, flexible and can be glued to other substrates with commercial adhesives.
Sheets are available in the following sizes:
| 2 x 4 feet | 4 x 4 feet |
| 4 x 8 feet | 4 x 10 feet |
| 4 x 25 feet | 4 x 50 feet |
Expanded Metal Backed
Expanded Metal-Backed sheets are backed with 16-gauge steel that makes them more rigid and flat. The metal backing also provides a structurally sound "stopping point" for bolt heads.
Expanded Metal-Backed sheets are available in 1-foot increments between 1 x 1 foot and 4 x 10 feet. Thickness can range from 1/8 to 1 inch.
Perfoback™
Perfoback™ sheets are backed with perforated metal. The small openings accommodate self-tapping metal screws.
Available in 4 x 10-foot sheets.
Diamondback® Fastening Solutions
Wedgie Bolt
Wedgie Bolts are the longest-wearing fastening solution for urethane. Made of Diamondback® material, they offer superior leakage resistance up to 1200 PSI and can outwear heat-treated alloy steel by a 6:1 margin. Wedgie bolts can be used with sheets that are between 1/4 and 1 inch thick.
Weldable Diamondback®
Metal plates welded to the back of these urethane sheets allow them to be welded onto metal surfaces.
Perfo™ Screw
For use with Perfoback™ urethane.
Molded-in Bolts
Bolts can be molded into your material per your custom specifications.
Speciality Adhesives
Used for gluing Non-Reinforced and Cotton Fabric–Backed Diamondback®.
Contact Bailey-Parks today to discuss our Diamondback® polyurethane sheet products. Our knowledgeable sales team can help you find the right urethane solution to fit your needs.
ADDITIONAL Capabilities
Bailey-Parks Urethane works hard to create solutions and provide quality custom service for our customers.
