Expanded Metal Back Sheet

Diamondback™️ brand by Bailey-Parks

The 16-gauge steel produces a sheet that’s more rigid and flat & creates a structurally sound stopping point for bolt heads. Thickness from 3/16” to 1”-plus.

Diamondback® Expanded Metal Back Sheet

Backed with 16-gauge steel makes the Expanded Metal-Backed urethane sheets more rigid and flat. The metal backing also provides a structurally sound “stopping point” for bolt heads.

Expanded Metal-Backed Diamondback® sheets are available in standard sizes 4’ x 10’ and 5’ x 10’. Thickness can range from 3/16” to 1”+.

Related Products

Ceramic Chip Urethane Liner

Embedding ceramic chips in urethane creates outstanding resistance to abrasion; Diamondback beats other manufacturers’ ceramic to urethane ratio per sheet.

Fabric-Backed Industrial Liners

Cotton Fabric–Backed Diamondback® urethane sheets are Lightweight and flexible, can be glued to other substrates with commercial adhesives.

Non-Reinforced (no backing) Liners

Non-reinforced urethane sheets have no backing. They are the most lightweight and flexible of all Diamondback® polyurethane sheet types and can be hand-formed.

Precision Cast Polyurethane Sheeting

Built to close tolerance specs like custom gasket fabrication; guaranteed uniform thickness, even at 1/32”. Abrasion resistant, abates noise & vibration, provides cushioning and insulation